1970 Plymouth. Dodge B-body RH bucket seat Track,Pass.side inner (1971-74 ?)

Description

This seat track is in very solid working condition. No slop ,track works as it should.Little light rust.
Height frt track is 3 1/8 inch
height of rear is 2 3/4 inch
Floor studs center to center measure 12 1/8 inch
Seat mount holes center to center 12 inch
Check out pics. You will notice the track is open in different positions. The top locking lever is there just missing the spring.solid track.Studs are usable.
I removed the track from a '73 roadrunner passenger side seat. The seat was last in a '74 satellite bench seat car from what I was told..
Yes the track is a RH inner track. I know its not a A or E body but does appear to be a B- body not certain 71-74. From what I can tell is those years don't have top locking lever & bases are slightly different.
From all my looking the match I can find is the 1970 B-body.
I can be wrong about it & could be the orginal track off the '73 roadrunner seat.
The 1970 year has the top lock lever ,similar base & also on top track rear bolt hole ,has the reinforced plating in same place, where as other years don't.
Classic industries has a great pic of new track per to look at part # MB184624. If you'd like to check it out.
I have not found a good example of a "73 track to compare
I can not be 100% certain of the year
Be certain this is the track you want.no returns,,I can not guaranty that in the 44 yrs pryer to my owning the seats what its history is & what tracks they may have had on them. It was the only normal track on the seat the other 3 where modified late 70's tracks
The only #'s I have found are on the top near lever 28. 5
If anyone knows a opinion feel free to give