-40%
Adaptec ASR-7805 1G

Adaptec ASR-7805 1G

$ 71.28

Availability: 100 in stock
  • Condition: Part was in-use between 2 and 3 years and was pulled in full working condition when the server was upgraded
  • Return shipping will be paid by: Buyer
  • Item must be returned within: 14 Days
  • Brand: Adaptec
  • Number of Ports: 8
  • Restocking Fee: No
  • Refund will be given as: Money Back
  • All returns accepted: Returns Accepted

    Description

    Card comes with (1x) Mini SAS cable that has 4 connections, Manual, and CD with software
    Description: The Adaptec series 7 RAID adapter family features PMC's 24 port PM8015 RAID-on-Chip (ROC), which combines a x8 PCIe Gen3 interface with 6 Gb/s SAS ports to enable a new generation of high performance RAID adapters that are unmatched by any other ROC in the industry. Adaptec series 7 RAID adapters are available with 8 native SAS ports. While the PCIe Gen3 interface doubles bandwidth to the host compared to PCIe Gen2, it requires at least 16 6 Gb/s SAS ports to double the bandwidth to the storage devices.
    Windows OS Supported (36/64-bit):
    Windows 7
    Windows 8.1
    Windows 10
    Server 2008
    Server 2011
    Server 2012
    Server 2016
    Standard RAID Controller Features
    • Support for SAS disk drives, SATA/SATA II disk drives, and SATA and SAS Solid State Drives (SSDs)
    • Flash ROM for updates to controller firmware, BIOS, and the Adaptec RAID Configuration utility
    • Disk drive hot-swapping
    • Event logging and broadcasting, including email notification messages
    • Multiple options for creating and managing RAID arrays—A browser-based software application (maxView Storage Manager), a BIOS-based utility (ARC), a command line utility (ARCCONF) (see Managing Your Storage Space on page 54)
    • Native command queuing (NCQ), which lets disk drives arrange commands into the most efficient order for optimum performance
    • Support for disk drive enclosures with SES2 enclosure management hardware
    • Support for a flash backup module (see Adding a Flash Backup Module on page 16)
    • Support for Adaptec maxCache™ SSD read and write caching (see Modifying Cache Settings on page 73) Note: Adaptec maxCache is supported on Adaptec Series Q controllers only.
    • Power-management of disk drives in your storage space to reduce cooling and electricity costs (see Modifying Power Management Settings on page 73)
    • Audible alarm
    • I/O statistics logging Array-level Features
    • Support for RAID 0, RAID 1, RAID 5, RAID 10, RAID 50, and simple volumes
    • Support for hybrid RAID 1 and RAID 10 arrays comprised of hard drives and Solid State Drives (SSDs)
    • Support for hot spares (global and dedicated)
    • Support for automatic failover, so arrays are automatically rebuilt when a failed drive is replaced (applies to redundant arrays in SES2- or SAF-TE-enabled disk drive enclosures only)
    • Optimized disk utilization, which ensures that the full capacity of all disk drives can be used, even if the disk drives vary in size
    • Online capacity expansion, so you can increase the capacity of an array without recreating it
    • Support for array migration from one RAID level to another Advanced Data Protection Suite
    • Copyback Hot Spare—You can use this feature to move data from a hot spare back to its original location after a failed disk drive is replaced.
    • Striped Mirror (RAID 1E)—A RAID 1 Enhanced array is similar to a RAID 1 array except that data is both mirrored and striped, and more disk drives can be included.
    • Dual Drive Failure Protection (RAID 6)—A RAID 6 array is similar to a RAID 5 array except that it includes two independent sets of parity data instead of one.
    • Dual Drive Failure Protection (RAID 60)—A RAID 60 array is similar to a RAID 50 array except that it includes four independent sets of parity data instead of two.