Touchless Dispenser Sanitizer hands Automatic Dispenser Wall mount 1200ML

Description

* Working Area:
Hotel/ School/ Salon/ Shopping Mall/ Super Market/ Office / Warehouse
etc.
*
Drip/
Gel Nozzles (Spray Nozzles optional) -
such as: hand soap, hand sanitizer (drip or Gel),
70-75% alcohol
* Non-contact auto-sensing hand sanitizer smart sensing, Effective sensing distance is 8-10cm
and completely touchless design provides  for easy.
* Battery
: 4PCS X LR14 1.5V (NOT INCLUDED)
Plug in 2 Power Supply Modes - the power adapter's power jack is on the right side
and can be used at any time
Battery and 6V
/1A/5.5*2.5mm Plug power adapter not included, please
purchase on your own
How to change the spray head:
1.
Take off the nozzle: hold the machine tube
with tool, other hand to shake the nozzle (left and right), then pull off the nozzle from the tube.
2.
Push on the nozzle:
hold the machine tube with tool, other hand to shake the nozzle (left and right), then push on the nozzle on the tube and lock with machine tube.
Caution: Don’t always change the Nozzle, It will make the nozzle loose and not seal well.
Notes:
1.Leave at least 20cm space under the machine to prevent malfunction.
2.Do not install the auto dispenser in places exposed to strong sunlight or strong reflective objects.
3.Do not allow objects to block the liquid outlet.
4.Keep the liquid inside the spray machine clean without other strip or block impurities.
5.Do not expose the soap dispenser directly to water.
6.If the container contains liquids during disassembly, do not lay it flat. Otherwise, the liquid may flow out and soak into
the motor or circuit board and damage the product.
7. Please make sure the flowability of the gel is good, otherwise the gel doesn’t run into the outlet tube and the dispenser will not work
.
Other hand sanitizer station
as followed:
ASKA COMMUNICATION CORP.  2020 NW 129TH AVE. SUITE 205, MIAMI, FL, 33182